John Deere 9030T/9RT 30" 6500 Series Scraper Track

  • Model: E30AV02954
  • 4 Units in Stock
  • Manufactured by: Camoplast

Ask a Question

(image for) 1-509-257-1066

Add to Cart:

John Deere 9030T/9RT 30"

Camso 6500 Series (Scraper)

Durabuilt part# E30AV02954

OE Part# R545869

New - Replaces:

  • Part# 693-3041
image of track on tractor

9030T-9RT SERIES Compatible Models:

9430T, 9530T, 9630T, 9460RT, 9470RT, 9510RT, 9520RT, 9560RT, 9570RT, 9460RT Scraper Special, 9470RT Scraper special, 9510RT Scraper Special, 9520RT Scraper special, 9560RT Scraper Special, 9570RT Scraper special

Technical Specifications

AVAILABLE SIZES
30 in (762 mm)
TREADBAR HEIGHT
2.3 in (58 mm)
TREADBARS
88
TREADBAR TIP WIDTH
3.0 in (76 mm)
TREADBAR PITCH
9.0 in (228 mm)
GUIDE LUGS
50
GUIDE LUG LENGTH
5.3 in (135 mm)
CARCASS THICKNESS
1.73 in (44 mm)

Camso 6500 Series (Scraper)

Built for the toughest conditions of agricultural tractor scraper applications, this track has specifically designed layers of rubber on the inside surface to provide improved puncture resistance. This reduces the possibility of damaging the main cables, improving overall track life.

The Camso 6500 Series tracks utilize the largest main cable in the industry. The heavy duty cable is 24% larger than the cable used in the 5500 Series tracks, making it the strongest track in the market and best in class track for scraper applications.

For superior track retention and track life on sidehills, the 6500 Series track employs longer, 5.3 in (140 mm) guide lugs. The treadbar height is reduced to 2.3 in (58 mm) and the tip is widened to 3 in (76mm). The reason for this is that in hard soil conditions, the treadbar may not achieve much penetration into the surface. The drawbar load is then transferred to the ground through the tip of the treadbar. This may cause the treadbar to fatigue over time and reduce the life of the track. The design of the treadbars reduce the loads on the base of the treadbar, resulting in both improved tread life and smoother ride when operating in scraper applications.

Track Series vs. Application Matrix

APPLICATION/OPERATION DESCRIPTION Camso 6500 Series (Scraper)
Soil Types

Hard packed clay

OK to use

Silt/loam

OK to use

Sticky and wet ground conditions

OK to use

Gumbo

OK to use

Rocky/Abrasive

OK to use

Gravel

OK to use

Sandy

OK to use

Snow/Ice

OK to use

Field Conditions

Minimal ground disturbance/Berming

Recommended

Extreme cold

Not recommended

In furrow applications

Not recommended

Short fields, applications requiring a lot of turning

OK to use

Flat land farming, slopes up to 10%

OK to use

Moderate side slope applications, slopes from 10 to 25%

OK to use

Severe side slope applications, slopes greater than 25%

OK to use

Road Travel

Small amount of roading, most field and travel distances within 5 mile radius

OK to use

Moderate amount of roading, most field and travel distances between 5 and 10 mile radius

OK to use

High amount of roading, typically travel in excess of 10 miles

Not recommended

Crop Types

Wheat/Cereal grains

OK to use

Corn/Sorghum

OK to use

Soybeans

OK to use

Alfalfa/Grasses/Switchgrass

OK to use

Cotton

OK to use

Sunflowers

OK to use

Rice

OK to use

Sugarcane

OK to use

Sugar beets

OK to use

Vegetables

OK to use

Applications

Primary tillage (deep ripping, chisel plow, etc

OK to use

Secondary tillage (field cultivator, disk, roller, etc

OK to use

Fully mounted roll over plow

OK to use

Row crop planter

OK to use

Air seeder

OK to use

Manure tank

OK to use

Grain cart

OK to use

Tile plow

OK to use

Spraying

OK to use

Hay baling

OK to use

Stalk chopper/Brush hog

OK to use

Vegetable bedder

OK to use

Front Blade — Silage

Not recommended

Forage harvestor

Not recommended

Snow grooming

OK to use

Agricultural scraper

OK to use

Commercial scraper

OK to use

Forestry

Recommended

Non-agricultural applications

Recommended

D & J Farm Supply BBB Business Review
Copyright © 2024 D & J Farm Supply. Powered by Zen Cart
(image for) webbsslough