John Deere 8000T Series
Kile® Clear View® Caps
Model: K CVC JD 8000T
Kile Clear View Cap Kit Includes:
- 12 Roller caps
- 4 Idler caps
- 12 Roller cap gaskets
- 4 Idler cap gaskets
- 16 Plugs with o-rings
- plug wrench with key ring
8000T Compatible Models:
(Fits all 8100T, 8200T, 8300T, 8400T, 8110T, 8210T, 8310T, 8410T; early 8120T, 8220T, 8320T, 8420T, 8520T prior to s/n 901999 with 5' wide roller rims.)
assist you by giving operators the ability to view and maintain proper oil levels of the idler and roller hubs. Clarity of oil, as well as sufficient oil, can help prevent the replacement and downtime of your equipment due to idler and roller repair.
The benefits of Kile® Clear View® Caps are:
- Ease of view of oil levels of idler & roller wheel hubs
- View clarity of oil
- Scratch resistant
- UV protected plastic
- High impact plastic protects against breakage
- Resistant to weather conditions of extreme heat or cold
- View inside and outside idlers and rollers with ease
- 5 year pro-rated warranty
Installation instructions:
Remove OEM cap.
Allow oil to completely drain. Remove any old gasket material from face of roller and idler hubs.
Bolt the Kile® Clear View® Caps, with gaskets, to the hub and tighten bolts to 35-45 inch pounds.
Replace oil to manufacture specifications.
Tighten plug with plug wrench.
DO NOT OVER TIGHTEN MOUNTING BOLTS. OVER TIGHTENING VOIDS WARRANTY. Use only soap and water to clean caps, no solvents (solvents can cause clouding and premature failure of caps. Solvent use will void warranty)(cite)
