Cat Challenger 27.5" 5500 Series General Ag Track

  • Model: 652-2702
  • 8 Units in Stock
  • Manufactured by: Camoplast

Ask a Question

(image for) 1-509-257-1066

Add to Cart:

Cat Challenger 27.5"

Camso 5500 Series (Cast Slotted Driver)

Durabuilt part# 652-2702

image of track on tractor

CAT TILLAGE (65-95 SERIES) Compatible Models:

65, 65B, 65C, 65D, 65E, 70C, 75C, 75D, 75E, 85C, 85D, 85E, 95E

Technical Specifications

AVAILABLE SIZES
27.5 in (699 mm)
30 in (762 mm)
TREADBAR HEIGHT
2.6 in (66 mm)
TREADBARS
96
TREADBAR TIP WIDTH
1.5 in (38 mm)
TREADBAR PITCH
7.2 in (183 mm)
GUIDE LUGS
48
GUIDE LUG LENGTH
5.0 in (127 mm)
CARCASS THICKNESS
1.6 in (41 mm)

Camso 5500 Series (Cast Slotted Driver)

Camso 5500 series tracks were originally created for use with cast slotted drivewheels (CSD’s), and have filled that role successfully for many years. However, analysis has shown that worn CSD’s will accelerate damage to the inside of a track due to higher point loading from uneven sprocket tooth wear. This internal damage can reduce track life overall as a result.

Modification of the track construction has been shown to extend the life of Camso 5500 CSD tracks, especially with worn cast slotted drivewheels.

The Camso 5500 CSD Series tracks are the only tracks recommended for use with tractors equipped with cast slotted drivewheels.

To achieve maximum life from the Camso 5500 CSD Series tracks, Cast Slotted Drivers should be replaced if worn and the cast slotted drivewheel scrapers must be maintained and adjusted regularly. Please follow instructions in the OMM for proper adjustment procedures.

SPECIAL NOTE: For maximum track life, Camso recommends upgrading to 1R1184 and 1R1185 chevron style rubber drivewheels (inboard brakes) or 1R1247 and 1R1248 (older outboard brake machines) to replace the older worn cast slotted drivewheels. The listed rubber drivewheel designs use the latest compounds to provide the tractive benefits of the cast slotted drivewheels in nearly all farming applications, while significantly reducing track inner wear and tear caused by CSD’s.

Track Series vs. Application Matrix

APPLICATION/OPERATION DESCRIPTION Camso 5500 Series (Cast Slotted Driver)
Soil Types

Hard packed clay

Recommended

Silt/loam

OK to use

Sticky and wet ground conditions

OK to use

Gumbo

OK to use

Rocky/Abrasive

Recommended

Gravel

Recommended

Sandy

OK to use

Snow/Ice

OK to use

Track Configuration

Cast slotted drivewheels

Recommended

Rubberized drivewheels

Not recommended

Field Conditions

Minimal ground disturbance/Berming

OK to use

Extreme cold

OK to use

Short fields, applications requiring a lot of turning

Recommended

Flat land farming, slopes up to 10%

Recommended

Moderate side slope applications, slopes from 10 to 25%

Recommended

Severe side slope applications, slopes greater than 25%

Recommended

Road Travel

Small amount of roading, most field and travel distances within 5 mile radius

Recommended

Moderate amount of roading, most field and travel distances between 5 and 10 mile radius

Recommended

High amount of roading, typically travel in excess of 10 miles

OK to use

Crop Types

Wheat/Cereal grains

Recommended

Corn/Sorghum

Recommended

Soybeans

Recommended

Alfalfa/Grasses/Switchgrass

OK to use

Cotton

Recommended

Sunflowers

Recommended

Rice

OK to use

Sugarcane

Recommended

Sugar beets

OK to use

Vegetables

OK to use

D & J Farm Supply BBB Business Review
Copyright © 2024 D & J Farm Supply. Powered by Zen Cart
(image for) webbsslough