Agco MT800 36" 6500 Series Scraper Track

  • Model: E36AS02934
  • 6 Units in Stock
  • Manufactured by: Camoplast

Ask a Question

(image for) 1-509-257-1066

Add to Cart:

Agco MT800 36"

Camso 6500 Series (Scraper)

Durabuilt part# E36AS02934

OE Part# 581869D1

New - Replaces:

  • Part# 696-3651
  • Part# 696-3644
image of track on tractor

MT800 Compatible Models:

MT835, MT835B, MT835C, MT845, MT845B, MT845C, MT845E, MT855, MT855B, MT855C, MT855E, MT865, MT865B, MT865C, MT865E, MT875B, MT875C, MT875E

Technical Specifications

AVAILABLE SIZES
30 in (762 mm)
36 in (914 mm)
TREADBAR HEIGHT
2.2 in (57 mm)
TREADBARS
100
TREADBAR TIP WIDTH
2.8 in (71 mm)
TREADBAR PITCH
8 in (204 mm)
GUIDE LUGS
52
GUIDE LUG LENGTH
5.5 in (140 mm)
CARCASS THICKNESS
1.73 in (44 mm)

Camso 6500 Series (Scraper)

Built for the toughest conditions of agricultural tractor scraper applications, this track has specifically designed layers of rubber on the inside surface to provide improved puncture resistance. This reduces the possibility of damaging the main cables, improving overall track life.

The Camso 6500 Series tracks utilize the largest main cable in the industry. The extreme duty cable is 24% larger than the cable used in the 5500 Series tracks, making it the strongest track in the market and best in class track for scraper applications.

For superior track retention and track life on sidehills, the 6500 Series track employs longer, 5.5 inch (140 mm) guide lugs.

Due to the extreme loads transferred from the scraper to the tractors, the treadbars are 2.25 inch (57 mm) tall. This allows the track to slip reducing loads on the powertrain and track, increasing overall track life.

In hard soil conditions, the treadbar may not achieve much penetration into the surface. The drawbar load is then transferred to the ground through the tip of the treadbar. This may cause the treadbar to fatigue over time and reduce the life of the track. The design of the treadbars reduce the loads on the base of the treadbar, resulting in improved track life in scraper applications.

Track Series vs. Application Matrix

APPLICATION/OPERATION DESCRIPTION CAMSO 6500 (Scraper)
Soil Types

Hard packed clay

OK to use

Silt/loam

OK to use

Sticky and wet ground conditions

OK to use

Gumbo

OK to use

Rocky/Abrasive

OK to use

Gravel

OK to use

Sandy

OK to use

Snow/Ice

OK to use

Field Conditions

Minimal ground disturbance/Berming

Not recommended

Extreme cold

Not recommended

In furrow applications

Not recommended

Short fields, applications requiring a lot of turning

OK to use

Flat land farming, slopes up to 10%

OK to use

Moderate side slope applications, slopes from 10 to 25%

OK to use

Severe side slope applications, slopes greater than 25%

OK to use

Road Travel

Small amount of roading, most field and travel distances within 5 mile radius

OK to use

Moderate amount of roading, most field and travel distances between 5 and 10 mile radius

OK to use

High amount of roading, typically travel in excess of 10 miles

Not recommended

Crop Types

Wheat/Cereal grains

OK to use

Corn/Sorghum

OK to use

Soybeans

OK to use

Alfalfa/Grasses/Switchgrass

OK to use

Cotton

OK to use

Sunflowers

OK to use

Rice

OK to use

Sugarcane

OK to use

Sugar beets

OK to use

Vegetables

OK to use

Applications

Primary tillage (deep ripping, chisel plow, etc.

OK to use

Secondary tillage (field cultivator, disk, roller,etc.

OK to use

Fully mounted roll over plow

OK to use

Row crop planter

OK to use

Air seeder

OK to use

Manure tank

OK to use

Grain cart

OK to use

Tile plow

OK to use

Spraying

OK to use

Hay baling

OK to use

Stalk chopper/Brush hog

OK to use

Vegetable bedder

Not recommended

Front blade — Silage

Not recommended

Forage harvester

OK to use

Snow grooming

OK to use

Agricultural scraper

OK to use

Commercial scraper

Recommended

Forestry

Recommended

Non-agricultural applications

Recommended

D & J Farm Supply BBB Business Review
Copyright © 2024 D & J Farm Supply. Powered by Zen Cart
(image for) webbsslough